Food Establishment Inspection Report |
||||||||||||||||||||||||||||
Page 1 of ????????? | ||||||||||||||||||||||||||||
|
|
FOODBORNE ILLNESS RISK FACTORS AND PUBLIC HEALTH INTERVENTIONS |
Circle designated compliance status (IN, OUT, N/O, N/A) for each numbered item IN=in compliance OUT=not in compliance N/O=not observed N/A=not applicable Mark "X" in appropriate box for COS and/or R COS=corrected on-site during inspection R=repeat violation |
Risk factors are important practices or procedures identified as the most prevalent contributing factors of foodborne illness or injury. Public health interventions are control measures to prevent foodborne illness or injury. |
|
|
GOOD RETAIL PRACTICES |
Good Retail Practices are preventative measures to control the addition of pathogens, chemicals, and physical objects into foods. Mark "X" in appropriate box for COS and/or R COS=corrected on site during inspectionR=repeat violation |
|
|
IOCI 17-356
![]() |
Food Establishment Inspection Report |
||
Page 2 of ?????? | ||
Establishment: MANGO PARADISE | License/Permit #: 000000 | Date: 12/18/2023 |
Water Supply: Community Non-Community Licensed Non-Community Waste Water System: Community On-Site IEPA System |
Sanitizer: | Temperature Logs in Use: |
Location | Method | Sanitizer Type | Concentration (PPM) | Heat(F) |
CFPM Verification (name, expiration date, ID#): | |||
Presentation Type: | VISUAL | Number Attended: | 1 |
HACCP Discussed | HACCP Principle | Plan Onsite |
1. Determine the Hazard | Discussed the HACCP principle of Conducting a Hazard Analysis of identifying potential hazards in the foodservice establishment, such as receiving food from approved sources with the packaging intact. | No |
TEMPERATURE OBSERVATIONS |
Item/Location |
Temp |
Item/Location |
Temp |
Item/Location |
Temp |
CORN/CHEST FREEZER | 0.00°F |
OBSERVATIONS AND CORRECTIVE ACTIONS |
P=Priority PF=Priority Foundation C=Core R=Repeat |
Item Number |
P/PF/C/R | Code Reference | Violations cited in this report must be corrected within the time frames below. |
10 | PF | 5-202.12 (A) |
(A) A HANDWASHING SINK shall be equipped to provide water at a temperature of at least 100°F through a mixing valve or combination faucet. Water tank was empty. Water is provided for hand washing. Provide water of at least 100 deg F through a mixing valve or combination faucet. CORRECTED |
2 | C, R | 2-102.12 |
The person in charge shall be a certified food protection manager who has shown proficiency of required information through passing a test that is part of an accredited program (ANSI). The PIC is not a certified food protection manager. Register for an ANSI approved certified food protection manager course and successfully complete the course/examination within 60 days. Repeat, CORRECT BY: Feb 16, 2024 |
57 | C | 750.3400 (a) |
a) All food handlers, other than someone holding a food service sanitation manager certificate, shall receive or obtain training in basic food handling principles, within 30 days after employment.
All food handlers have not been trained. All food handlers must be trained by the next routine inspection. CORRECT BY NEXT ROUTINE INSPECTION |
36 |
A metal stem thermometer with a suitable small diameter probe is not provided..
Provide a metal stem thermometer. CORRECT BY: Dec 26, 2023 |
48 | R |
Test kits or other devices are not available to the employees to measure sanitizing solution concentration.
Provide a test kit or other measuring device so the employees can measure concentrations and ensure proper sanitization. Repeat, CORRECT BY: Dec 26, 2023 |
ALEXANDRA ANGEL Person In Charge (Signature) |
Ami Verma Inspector |
Follow-up: Yes No | Follow-up Date: 12/26/2023 |